搜索
ss
ss
新闻中心
News
-
-
平衡机叶轮怎么正确的操作

平衡机叶轮怎么正确的操作

  • 分类:新闻动态
  • 作者:平衡机
  • 来源:上海申岢动平衡机制造有限公司
  • 发布时间:2019-04-28 18:22
  • 访问量:

【概要描述】平衡机是用于测量转子不平衡的仪器,并根据测量结果进行校正,以改善平衡转子的质量分布,从而在转子运行期间轴颈的振动或作用在轴承上的力减少到规定的范围。

平衡机叶轮怎么正确的操作

平衡机是用于测量转子不平衡的仪器,并根据测量结果进行校正,以改善平衡转子的质量分布,从而在转子运行期间轴颈的振动或作用在轴承上的力减少到规定的范围。

  • 分类:新闻动态
  • 作者:平衡机
  • 来源:上海申岢动平衡机制造有限公司
  • 发布时间:2019-04-28 18:22
  • 访问量:

  平衡机的主要性能由最小可达残余不平衡和不平衡减少率的两个综合指标表示。平衡机中还有许多组件。叶轮的操作对于动平衡机的应用非常重要。操作动平衡机叶轮时需要注意哪些事项?介绍了平衡机的以下应用。

  The main performance of the balancing machine is represented by two comprehensive indicators of the minimum reachable residual unbalance and the unbalanced reduction rate. There are also many components in the balancing machine. The operation of the impeller is very important for the application of the dynamic balancing machine. What are the matters needing attention when operating the impeller of the dynamic balancing machine? The following application of the balancing machine is introduced.

  1.当动平衡机进行测量和记录时,必须根据测试结果将电机和叶轮组合,以减少制造公差对叶轮动平衡特性的影响。

  1. When the dynamic balancing machine performs measurement and recording, it is necessary to combine the motor and the impeller according to the test result to reduce the influence of manufacturing tolerance on the dynamic balance characteristics of the impeller.

  2.清洁动平衡机的叶轮时,应注意保护叶轮的动平衡状态。不应以粗暴和艰苦的方式拆卸叶轮。如果清洁后发现叶轮损坏严重,则需要及时更换新叶轮。

  2. When cleaning the impeller of the dynamic balancing machine, attention should be paid to the protection of the dynamic balance state of the impeller. The impeller should not be dismantled in a rough and arduous manner. If the impeller damage is found to be serious after cleaning, it is necessary to replace the new impeller in time.

  3.动平衡机采用严格验证的样品轴作为装配过程中叶轮检测的基准,以减少制造公差对装配精度的影响。

  3. The dynamic balancing machine uses the strictly verified sample shaft as the benchmark for detecting the impeller during the assembly process to reduce the influence of manufacturing tolerance on the assembly precision.

  平衡机是用于测量转子不平衡的仪器,并根据测量结果进行校正,以改善平衡转子的质量分布,从而在转子运行期间轴颈的振动或作用在轴承上的力减少到规定的范围。

  The balancing machine is an instrument for measuring the rotor imbalance, and is corrected according to the measurement result to improve the mass distribution of the balanced rotor, so that the vibration of the journal or the force acting on the bearing during the operation of the rotor is reduced to a prescribed range.

  以上是关于动平衡机的叶轮操作注意事项,希望对大家有所帮助。

  The above is about the impeller operation precautions of the dynamic balancing machine, I hope to help everyone.

关键词:

相关资讯